Every asphalt parking lot eventually requires maintenance. Asphalt maintenance is similar to automobile maintenance and household repairs. If it is not completed in a timely manner, it will sabotage quality and reliability. 

While Sealtite has only been a sealcoating manufacturing/supply company since 2012, our experience in parking lot and asphalt sealcoating is in no way limited.

​​ Titan Green™ Multipurpose Cleaner is a super strength concentrated cleaner with exceptional cleaning ability. It cleans everything washable, and produces spectacular results. Dirt, grease, oil, soot, vegetation and food stains, to name a few, quickly yield to this high-tech cleaner. 

Cleanup Solvent 22 replaces chlorinated solvents. It dries quickly and does not need a water rinse. It’s ideal for adhesive removal, carpet cleaning, removing chewing gum, tar, tree pitch grease and oils from all surfaces. Removes black scuff marks from wood or vinyl floors and baseboards.

Can Oil-Flo get paint out of carpet? It sure can! I can testify.

Oxi-Bond is a latex primer concentrate to improve bonding of pavement sealers.
Why Prime?

​Product Features:

• Superior sand suspension for uniform application
• Added resistance to gasoline, fuel, and oils
• Rubberizes pavement sealer for increased scuff resistance and reduced power steering marks
• Speeds up drying time of pavement sealer
• Sealer dries to a blacker color

​FASS-DRI is the latest advancement in NANO-CURE Technology for both asphalt and coal tar based pavement sealers. NANO-CURE Technology enable pavement sealer to dry from the bottom up as opposed to skinning over and trapping moisture within the film. 

You recycle plastic, paper, and cans so why not recycle your ASPHALT?
We have a Falcon Asphalt recycler for sale!
The possibilities are endless!

You should seal asphalt driveway spaces periodically for best results. There are many differing opinions about the frequency of the sealing. Some people say every year, while others say once every 10 years.

Good practice dictates that pavements be maintained and preserved so that major rehabilitation is not needed. For a variety of reasons, this does not always happen. Sometimes it is not practical to fully rehabilitate a badly deteriorated asphalt pavement. Cracking or other distresses may have progressed to the point that a more aggressive approach is needed. 

An asphalt emulsion consists of three basic components: asphalt, water and an emulsifying agent.
An asphalt emulsion is a stable dispersion of asphalt cement droplets in water, which can be pumped, stored and mixed with aggregates. 

As the name suggests, coal-tar is derived from coal. Coal tar is used primarily for the production of refined chemicals and coal-tar products, such as creosote and coal-tar pitch. Coal tar is proven to cause cancer.

​“Rhynotite” Product Application

1. Clean pavement of all dirt, dust, and debris
2. Fill cracks and patch all broken and alligatored areas with either hot mix or a cold patch material
3. Prime all oil spots with a latex product
4. “Rhynotite” may be applied by a hand or motorized squeegee or spray
5. Apply in any climate except raining or freezing weather with an additional additive, sunshine, wind, low humidity and elevated ambient temperatures will speed curing time
6. Can be diluted with clean, potable water. Mix dilution is a maximum of 20%. DO NOT over dilute the product as this will decrease the overall product performance and even lose viscosity with may cause the aggregate to fall to the bottom of the tank. Additionally, less water used to dilute will increase dry time. Product can be applied not diluting it at all.
7. Product is completely cured when water dries completely from the surface
8. For best results, use of “water-born” paint is recommended when striping seal coated areas.